Automation Building Lighting Control System DIN Rail Power Supply
Module
Smart Lighting Control System Solution Advantages
1. Cost and time advantages in planning, installation,
commissioning and reprogramming
2. Improves comfort.
3. High flexibility, extense function at any time
4. DIN rail components and surface mounted devices
5. Input and output combinated various devices.
6. All loads in the room (lights, blinds, heating, etc.) can be
controlled using a central device
DIN Rail Power Supply Module Specifications
Output Rating | 60 Watts (2.5 Amps) at 24 Volts DC, regulated, limited power source |
Line Power/Mains | 200 VA (2 Amps max.) @ 110-250 Volts AC, 50/60 Hz |
Power Consumption | 70 Watts at full rated output |
100-277VAC 50/60Hz | (2) Set of (3) captive screw terminals; Line power input and ground |
FUSE | (1) AC input fuse, T3.15AH;4x8 mm, 250 Volts, 3.15 Amps, time-lag,
ceramic cartridge |
NET | (2) 4-pin 3.81 mm detachable terminal blocks, paralleled;DC-NET
power output ports with data pass-through |
Ripple/Noise | <1% |
Efficiency | 85% |
Temperature | 32° to 104° F (0° to 40° C) |
Humidity | 10% to 90% RH (non- condensing) |
DIN Rail Power Supply Module Application
Automation Lighting Control System Applied in: stadium, school, hospital, airport, metro, church, office,
commercial building, parking lot/car park/parking area, outdoor
spaces, foyer, lobby, elevator hall, public walkway, bathroom,
underground garage, meeting room, villa, home lighting, plazas,
shopping malls, public building, industrial plants and factories,
etc
DIN Rail Power Supply Module Features
> 60 Watt DC-NET power supply module
> Powers the other DC-NET devices
> DC-NET data passes through unaffected
> Overload protection and detection of voltage and current
> 100-277 Volt AC line powered
DIN Rail Power Supply Module Installation
The DIN-PWS60 is designed to snap onto a standard DIN rail for
installation in a wall mount enclosure. Wiring connections are made
using screw terminals positioned along the top and bottom, clearly
accessible from the front for easy installation and servicing. All
setup controls and indicators are positioned on the center front
panel. When installed in an enclosure utilizing 45 mm cutouts, the
DIN-PWS60's front panel stays accessible while the connections are
concealed.
Enclosure
Light gray polycarbonate housing with polycarbonate label
overlay,UL 94 V-0 rated, 35 mm DIN EN 60715 rail mount, DIN 43880
form factor for enclosures with 45mm front panel cutout, occupies 8
DIN module spaces(143 mm).
FAQ
1. What is intelligent lightincontrol g system?
A lighting control system is an intelligent network based lighting
control solution that incorporates communication between various
system inputs and outputs related to lighting control with the use
of one or more central computing devices. Lighting control systems
are widely used on both indoor and outdoor lighting of commercial,
industrial, and residential spaces.
2. What is the advantage compare with the traditional lighting
control?
Improve energy efficiency
Reduce maintenance cost
Easy operation and more convenient
3. What Okystar can supply for you?
Okystar can offer a whole solution of lighting control system for
you, economic and customization, with industrial-grade design,
product architecture in line with international electrical
standards, using high-quality components, products are stable and
reliable.
